Cem Dual Mig 120 Manual May 2026

These are consumables. If the wire is "stuttering," replace the copper tip at the end of the torch.

This usually means your shielding gas is off, empty, or there’s a breeze blowing the gas away. If using gasless wire, it means the metal is too dirty. cem dual mig 120 manual

Ensure you have a solid ground clamp connection on clean, unpainted metal. These are consumables

For Gas (Solid Wire) , the torch is usually Positive (+). For Gasless (Flux-Cored) , the torch is usually Negative (-). Check the internal terminals near the wire feed motor to switch these. 4. Maintenance Tips If using gasless wire, it means the metal is too dirty

If the wire won't feed even with high tension, your torch liner might be kinked or clogged with dust. 5. Troubleshooting Common Issues

The Dual MIG 120 is designed primarily for light to medium-duty tasks. 230V (Standard UK/European plug). Amperage Range: Typically adjustable from 30A to 120A.